John Guest

The John Guest PM09602E is a pneumatic fitting that features a 1/4" BSPT male swivel elbow connection on one end and a 6mm outside diameter (O/D) ...

The John Guest PM090502E is a push-fit fitting that connects a 1/4" BSPT male thread to a 5mm outer diameter tube. The fitting is a swivel elbow, ...

The John Guest PM09402E is a swivel elbow fitting that connects a 1/4" BSPT male thread to a 4mm outer diameter tube. It is part of the John Guest...

The John Guest STS28 is a tube support designed to provide extra support for 28mm Superseal tubing. It is made of high-quality plastic material th...

John Guest MW01288N is another type of fitting manufactured by John Guest, which is similar to the MW012818N fitting in terms of size but has a dif...

The John Guest JG603B is a type of coupling designed for use in underground fittings in plumbing and other applications. It features a 25mm PE (po...

John Guest MW012818N is another type of fitting manufactured by John Guest, with an even larger size than the previous two fittings. This fitting h...

The John Guest PEM532215W is a plastic stem tee fitting used for connecting three tubes of different sizes in a plumbing or water filtration system...

The John Guest PEM302210AW is a tee connector used to connect three pipes together. It has three connection points, all with different sizes: two ...

22mm Outside Diameter x 10mm Stem Outside Diameter, Stem Tee, Push Fitting, Plastic, John Guest

The John Guest SFM522210S is a 4 rail manifold designed for use in plumbing and heating systems. The manifold has a 22mm inlet and four 10mm outle...

The John Guest SFM512210S is a 22mm-10mm x 4 inline manifold, commonly used in plumbing and heating systems. The manifold is designed to distribut...

The John Guest 22WB is a type of fitting that is designed to be used with 22mm tubing and features a 3/4" BSP (British Standard Pipe) wing-back. Th...

The John Guest STS22 is a tube support designed to secure and stabilize 22mm Superseal tubing in various applications. The STS22 is made of high-q...

John Guest NC473 is a type of fitting manufactured by John Guest, which is a hose connector that connects a hose with a 22mm inner diameter to a fe...

John Guest MW01226N is another type of fitting manufactured by John Guest, with a larger size than the MW01154N. This fitting has a 22mm outer diam...

The John Guest 22EPR is a type of fitting that is designed to be used with 22mm tubing. It features an "O" ring that helps to provide a secure seal...

The John Guest JG601B is a type of coupling designed for use in underground fittings in plumbing and other applications. It features a 20mm PE (pol...

The John Guest PI251210S is a fitting designed to connect a 3/8" outside diameter (O/D) tube to a 5/16" inside diameter (I/D) hose. The stem of th...

The John Guest PI481223S is a push-to-connect fitting designed for use with 3/8" outside diameter (O/D) tubing and 3/8" National Pipe Thread (NPT)...

The John Guest PI091203S is a 3/8" O/D (outside diameter) tube x 3/8" BSPT (British Standard Pipe Thread) male swivel elbow fitting. It is a type ...

John Guest PI251212S is a fitting designed for use with 3/8" O/D (outer diameter) tubing and 3/8" I/D (inner diameter) hose. It features a stem-li...

The John Guest PI451213S is a 3/8" O/D (outer diameter) Tube x 3/8" BSP (British Standard Pipe) Female Adaptor. It is a fitting used in plumbing an...

The John Guest PI091202S is a push-in fitting that connects a 3/8" outside diameter (O/D) tube to a 1/4-2 British Standard Pipe Taper (BSPT) male ...

1/4" NPT Male x 3/8" Outside Diameter, Imperial Push-in Fitting, 90 Stud Elbow, Plastic, Working Temperature 0C to +23C, Maximum Working Pressure 1...

The John Guest PI29128S is a push-in fitting that allows for a 3/8" outside diameter (O/D) tube to connect to a 1/4" inside diameter (I/D) hose us...

The John Guest PI25128S fitting is a push-to-connect fitting that allows for easy and secure connection of 3/8" outside diameter (O/D) tubing to a...

The John Guest PI251216S is a fitting that has a 3/8" outside diameter (O/D) tube connection on one end and a 1/2" inside diameter (I/D) hose stem...

The John Guest PI451214FS is a 3/8" O/D (outside diameter) tube x 1/2" BSP (British Standard Pipe) female adaptor. It is a plumbing fitting used t...

The John Guest PI4612S is a 3/8" O/D (outer diameter) tube stop end fitting. It is designed to terminate the flow of fluid or gas in a 3/8" tube. ...

The John Guest PI2312S is a 3/8" O/D Tube Equal Y Connector, which means it is a type of fitting used in plumbing and fluid transfer systems. Spec...

The John Guest PI4712S is a 3/8" O/D Tube Equal Cross fitting. It is a type of push-fit fitting that is used to connect four tubes of equal diamet...

The John Guest PI0212S is a 3/8" O/D (outside diameter) equal tee fitting. It is designed for use in plumbing and pneumatic systems to connect thr...

The John Guest PM05803E is a push-fit stem adapter designed to connect a 3/8" BSPT male pipe thread to an 8mm outer diameter (O/D) tube or pipe. T...

The John Guest PM051203E is a 3/8" BSPT Male x 12mm O/D Stem Adaptor. This adapter is designed to connect a male BSPT (British Standard Pipe Taper...

The John Guest PM051003E is a fitting that allows for the connection of a 3/8" BSPT male thread to a 10mm outside diameter (O/D) stem. This fittin...

The John Guest PM09803S is a push-fit fitting designed for connecting 5/16" outer diameter (O/D) tubing to a 3/8" British Standard Pipe Taper (BSP...

The John Guest PM09803E is a 3/8" BSPT Male Swivel Elbow fitting designed for use with 8mm outside diameter (O/D) tubing. This fitting is part of ...

The John Guest PM091003E is a plumbing fitting that allows for a 3/8" BSPT male swivel elbow to be connected to a 10mm O/D (outside diameter) tube...

The John Guest PM091203E is a fitting designed for use in plumbing and fluid transfer applications. Specifically, it is a 3/8" BSPT male swivel el...

The John Guest PM05813E is a fitting adapter that allows connection between a male 3/8" BSPP (British Standard Pipe Parallel) thread and an 8mm ou...

The John Guest PM091213E is a type of push-in fitting that connects a 3/8" BSPP male thread to a 12mm outer diameter (O/D) tube. The fitting has a...

The John Guest PM09813E is a 3/8" BSPP Male Swivel Elbow that is designed to connect to an 8mm outside diameter (O/D) tube. The male swivel elbow ...

The John Guest PM091013E is a 3/8" BSPP male swivel elbow fitting designed for use with a 10mm outer diameter (O/D) tube. This fitting is part of ...

The John Guest RM1713 is a 3/8" BSPP Double Banjo Stem, which is a type of fitting commonly used in plumbing and fluid transfer applications. The ...

The John Guest PPSV41212W is a shut-off valve designed for use in water filtration systems and other applications where flow control is needed. It...

The John Guest PI2266S is a push-in tube stem elbow fitting designed for use with 3/16" outside diameter (O/D) tubing. The elbow fitting is made f...

The John Guest PI01601S is a male straight adapter designed for use in pneumatic and fluid systems. It has a 3/16" outside diameter (O/D) and a 1/...