John Guest

The John Guest PI0216S is a 1/2" O/D (outer diameter) equal tee fitting, commonly used in plumbing and water filtration systems. It is made of hig...

The John Guest PM01801E is an 8mm outside diameter (O/D) by 1/8 inch British Standard Pipe Thread (BSPT) male straight adapter. It is designed to ...

The John Guest PM6108E is a stem reducer fitting designed for use in plumbing and fluid handling applications. It is used to connect two tubes wit...

The John Guest PM0210E is a type of push-fit tee connector used in plumbing and fluid transfer systems. It is designed to connect three 10mm outer...

The John Guest PM410E is a 10mm outer diameter (O/D) equal straight connector. This connector is part of the John Guest range of push-fit fittings...

The John Guest PM028E is an 8mm outside diameter (O/D) Equal Tee Connector designed for use with plastic tubing in a wide range of applications su...

The John Guest PM48S is a straight connector fitting designed for use with 5/16" outside diameter (O/D) tubing. It is an equal connector, meaning ...

The John Guest PM01803S is a straight adaptor fitting designed for use in pneumatic and fluid transfer systems. The fitting features a 5/16" outsi...

The John Guest PI20108S is a straight connector designed to connect tubing with different outer diameters. It has a 5/16" outer diameter on one en...

The John Guest PM86R is a plug fitting designed for use with 6mm outside diameter (O/D) tubing. It is colored red for easy identification and is p...

The John Guest PM46E is a straight connector designed for use with 6mm outer diameter (O/D) tubing. It is an equal connector, meaning that both en...

The John Guest PPMSV41010W is a shut-off valve with 10mm inlet and outlet connections. This valve is designed to allow for easy control and shut-o...

The John Guest PI2988S is a 1/4" O/D (outer diameter) Tube x 1/4" I/D (inner diameter) Hose Barb Elbow fitting. This fitting is designed for use w...

The John Guest PM09802E is a swivel elbow fitting designed for use with 1/4" BSPT male threads and 8mm outside diameter (O/D) tubing. The fitting ...

The John Guest PI6128S is a fitting designed for use in pneumatic and fluid systems. It is a reducer fitting that allows for the connection of tub...

The John Guest PI1212S is a bulkhead connector designed for use with 3/8" outside diameter (O/D) tubing. It is commonly used in applications where...

The John Guest PI46S is a straight connector designed to connect two 3/16" outside diameter (O/D) tubes. It is an equal straight connector, meanin...

The John Guest PIC188R is a locking clip designed for use with 1/4" outer diameter (O/D) tubing. It is an Imperial-sized product, which means it i...

The John Guest PI01821S is a straight adaptor fitting designed for connecting a 1/4" outside diameter (O/D) tube to a 1/8" National Pipe Thread (N...

The John Guest PM238S Y connector is designed for use with 5/16" outer diameter (O/D) tubing. It allows you to split a single tube into two, creat...

The John Guest PM051514E is a plumbing component that is used to connect a 1/2 inch BSPP (British Standard Pipe Parallel) male fitting to a 15mm o...

The John Guest PM011516E is a straight adapter fitting used to connect 15mm outer diameter (O/D) plastic or copper pipes to a 3/4 inch BSPP (Briti...

The John Guest PM61512E is a stem reducer fitting that is designed to connect a pipe with a 15mm outside diameter (O/D) to a pipe with a 12mm O/D....

The John Guest PI011203S is a male straight adapter fitting that allows for a connection between a 3/8" outside diameter (O/D) tube and a 3/8" Brit...

1/8" BSP Parallel Male x 4mm Outside Diameter, Banjo Flow Control, Manual Adjustment, Acetal Copolymer, Brass and Stainless Steel, Working Temperat...

The John Guest PI221616S is a 1/2" O/D x 1/2" O/D Tube Stem Elbow fitting. It is designed to connect two tubes together at a 90-degree angle. This...

The John Guest PM45411E is a female adapter fitting with a 1/8" outside diameter (O/D). This fitting is part of the John Guest push-fit fitting sy...

The John Guest STS15 is a 15mm Superseal Tube Support designed to securely hold and support 15mm pipes or tubes. It is typically used in plumbing ...

The John Guest PM810R is a red-colored plug designed for use with 10mm outside diameter (O/D) tubing. It is part of the John Guest range of push-f...

The John Guest RM011012 is a straight adapter with a 1/4" BSPM (British Standard Pipe Male) thread on one end and a 10mm outside diameter (O/D) on ...

The John Guest PM686E is a stem reducer fitting designed for use in pneumatic and fluid applications. The fitting has an 8mm outside diameter (O/D...

The John Guest PM21106E is a reducing elbow connector designed for use in plumbing and fluid transfer applications. The connector has a 10mm outsi...

The John Guest PI25108S is a fitting that has a 5/16" outside diameter (O/D) tube connection and a 1/4" inside diameter (I/D) hose stem connection...

The John Guest PM20106E is a reducing straight connector that allows you to connect two pipes of different diameters. Specifically, it has a 10mm ...

The John Guest PM038E is an Equal Elbow Connector with a 8mm tube connection. It is a push-fit fitting designed for use with John Guest Speedfit a...

The John Guest PI09802S is a swivel elbow fitting designed for use with 1/4" O/D (outer diameter) tubing and a 1/4" BSPT (British Standard Pipe Ta...

The John Guest PI812S is a stem plug designed for use with 3/8" outside diameter (O/D) tubing. It is typically used in plumbing and fluid transfer...

The John Guest PI412S is a push-fit equal straight connector designed to connect two 3/8 inch outside diameter (O/D) pipes or tubes. It is part of...

The John Guest PI0312S is a push-in fitting that has a 3/8" outer diameter (O/D) and is designed as an equal elbow, which means that both ends of ...

The John Guest PM051013E is a fitting designed to connect a 3/8" BSPP (British Standard Parallel Pipe) male thread to a 10mm outside diameter (O/D...

The John Guest PMC188R Locking Clip is designed to secure 5/16" tube with an outer diameter of 8mm in place. The locking clip is used in conjuncti...

The John Guest PM2610S is a flow bend tube clip designed for use with 3/8" outside diameter (O/D) tubing. It is commonly used in plumbing and othe...

The John Guest PMTT22E is a Trap Tee fitting with an outer diameter (O/D) of 22mm. It is part of the John Guest push-fit plumbing system, which al...

The John Guest PM052216E is a plumbing fitting that is designed to connect a 3/4" BSPP (British Standard Pipe Parallel) male threaded pipe to a 22...

The John Guest WTC28 is a Water Trap Tee Converter with a 28mm size. It is designed to connect a waste pipe to a waste trap, providing an efficien...

The John Guest AL-RM2826-3M-10B is a type of tubing that is designed for use in a variety of applications, including air and gas lines, as well as ...

22mm Outside Diameter x 20mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Blue Coated Aluminium, Tube, Working Temperature -25C to...

18mm Outside Diameter x 16mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Blue Coated Aluminium, Tube, Working Temperature -25C to...