John Guest

1/8" BSP Parallel Male x 4mm Outside Diameter, Banjo Flow Control, Manual Adjustment, Acetal Copolymer, Brass and Stainless Steel, Working Temperat...

The John Guest PI221616S is a 1/2" O/D x 1/2" O/D Tube Stem Elbow fitting. It is designed to connect two tubes together at a 90-degree angle. This...

The John Guest PM45411E is a female adapter fitting with a 1/8" outside diameter (O/D). This fitting is part of the John Guest push-fit fitting sy...

The John Guest STS15 is a 15mm Superseal Tube Support designed to securely hold and support 15mm pipes or tubes. It is typically used in plumbing ...

The John Guest PM810R is a red-colored plug designed for use with 10mm outside diameter (O/D) tubing. It is part of the John Guest range of push-f...

The John Guest RM011012 is a straight adapter with a 1/4" BSPM (British Standard Pipe Male) thread on one end and a 10mm outside diameter (O/D) on ...

The John Guest PM686E is a stem reducer fitting designed for use in pneumatic and fluid applications. The fitting has an 8mm outside diameter (O/D...

The John Guest PM21106E is a reducing elbow connector designed for use in plumbing and fluid transfer applications. The connector has a 10mm outsi...

The John Guest PI25108S is a fitting that has a 5/16" outside diameter (O/D) tube connection and a 1/4" inside diameter (I/D) hose stem connection...

The John Guest PM20106E is a reducing straight connector that allows you to connect two pipes of different diameters. Specifically, it has a 10mm ...

The John Guest PM038E is an Equal Elbow Connector with a 8mm tube connection. It is a push-fit fitting designed for use with John Guest Speedfit a...

The John Guest PI09802S is a swivel elbow fitting designed for use with 1/4" O/D (outer diameter) tubing and a 1/4" BSPT (British Standard Pipe Ta...

The John Guest PI812S is a stem plug designed for use with 3/8" outside diameter (O/D) tubing. It is typically used in plumbing and fluid transfer...

The John Guest PI412S is a push-fit equal straight connector designed to connect two 3/8 inch outside diameter (O/D) pipes or tubes. It is part of...

The John Guest PI0312S is a push-in fitting that has a 3/8" outer diameter (O/D) and is designed as an equal elbow, which means that both ends of ...

The John Guest PM051013E is a fitting designed to connect a 3/8" BSPP (British Standard Parallel Pipe) male thread to a 10mm outside diameter (O/D...

The John Guest PMC188R Locking Clip is designed to secure 5/16" tube with an outer diameter of 8mm in place. The locking clip is used in conjuncti...

The John Guest PM2610S is a flow bend tube clip designed for use with 3/8" outside diameter (O/D) tubing. It is commonly used in plumbing and othe...

The John Guest PMTT22E is a Trap Tee fitting with an outer diameter (O/D) of 22mm. It is part of the John Guest push-fit plumbing system, which al...

The John Guest PM052216E is a plumbing fitting that is designed to connect a 3/4" BSPP (British Standard Pipe Parallel) male threaded pipe to a 22...

The John Guest WTC28 is a Water Trap Tee Converter with a 28mm size. It is designed to connect a waste pipe to a waste trap, providing an efficien...

The John Guest AL-RM2826-3M-10B is a type of tubing that is designed for use in a variety of applications, including air and gas lines, as well as ...

22mm Outside Diameter x 20mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Blue Coated Aluminium, Tube, Working Temperature -25C to...

18mm Outside Diameter x 16mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Blue Coated Aluminium, Tube, Working Temperature -25C to...

15mm Outside Diameter, Fast-track Ring Main System, Tube Clip, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar, John Guest

The John Guest PM0215E is a fast-track 15mm O/D equal tee connector. This type of connector is commonly used in plumbing and HVAC systems to conne...

The John Guest PM415E is a straight connector designed for use with 15mm outside diameter (O/D) tubing. It is an equal connector, meaning that it ...

The John Guest PM0315E is a push-fit equal elbow connector designed for use with 15mm outer diameter (O/D) pipes. This elbow connector allows for ...

15mm Outside Diameter, Fast-track Ring Main System, Aluminium Pipe, Cutter. The John Guest ALU-CUTTER15 is a pipe cutter designed specifically for ...

The John Guest PM4615E is a 15mm O/D (outside diameter) end stop designed for use with John Guest push-fit fittings. End stops are used to termina...

The John Guest PM011214E is a male straight adapter fitting designed to connect a 12mm outer diameter (O/D) tubing to a 1/2" BSP (British Standard...

The John Guest PM1915E is a black collet cover designed for use with 15mm outside diameter (O/D) tubing. The collet cover is used in conjunction w...

The John Guest PM0212E is a 12mm O/D (outer diameter) equal tee connector used for joining three equal-sized tubes or pipes in a plumbing or fluid...

12mm Outside Diameter x 9mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Nylon 12, Tube, Working Temperature -35C to +80C, Maximum...

The John Guest PM412E is a 12mm outside diameter (O/D) equal straight connector. It is designed to connect two pieces of 12mm O/D tubing in a stra...

The John Guest PM0312E is a push-fit equal elbow connector designed for use with 12mm outer diameter (O/D) pipes or tubing. It is commonly used in...