John Guest

15mm Outside Diameter, Fast-track Ring Main System, Tube Clip, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar, John Guest

The John Guest PM0215E is a fast-track 15mm O/D equal tee connector. This type of connector is commonly used in plumbing and HVAC systems to conne...

The John Guest PM415E is a straight connector designed for use with 15mm outside diameter (O/D) tubing. It is an equal connector, meaning that it ...

The John Guest PM0315E is a push-fit equal elbow connector designed for use with 15mm outer diameter (O/D) pipes. This elbow connector allows for ...

15mm Outside Diameter, Fast-track Ring Main System, Aluminium Pipe, Cutter. The John Guest ALU-CUTTER15 is a pipe cutter designed specifically for ...

The John Guest PM4615E is a 15mm O/D (outside diameter) end stop designed for use with John Guest push-fit fittings. End stops are used to termina...

The John Guest PM011214E is a male straight adapter fitting designed to connect a 12mm outer diameter (O/D) tubing to a 1/2" BSP (British Standard...

The John Guest PM1915E is a black collet cover designed for use with 15mm outside diameter (O/D) tubing. The collet cover is used in conjunction w...

The John Guest PM0212E is a 12mm O/D (outer diameter) equal tee connector used for joining three equal-sized tubes or pipes in a plumbing or fluid...

12mm Outside Diameter x 9mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Nylon 12, Tube, Working Temperature -35C to +80C, Maximum...

The John Guest PM412E is a 12mm outside diameter (O/D) equal straight connector. It is designed to connect two pieces of 12mm O/D tubing in a stra...

The John Guest PM0312E is a push-fit equal elbow connector designed for use with 12mm outer diameter (O/D) pipes or tubing. It is commonly used in...

The John Guest AL-RM1210-3M-20B is a type of tubing that is designed for use in a variety of applications, including air and gas lines, as well as ...

The John Guest PM4612E is a 12mm O/D (outer diameter) End Stop, designed for use with John Guest tubing systems. It is typically used to terminate...

The John Guest PMUB15E is a 15mm outside diameter (O/D) U-bend fitting. It is part of the John Guest push-fit fitting system, which allows for qui...

3/4" BSP Parallel Male x 22mm Outside Diameter, Fast-track Ring Main System, Stud, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar...

28mm Outside Diameter x 23mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Nylon 12, Tube, Working Temperature -35C to +80C, Maximu...

Stand Off Spacer, Fast-track Ring Main System, Tube Clip, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar, John Guest

The John Guest PM052214E is a fitting adapter that allows for the connection of two different plumbing components. This adapter has a 1/2" BSPP Ma...

1" NPT Male x 28mm Outside Diameter, Fast-track Ring Main System, Stem Adaptor, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar. T...

The John Guest PM051814E is an adapter fitting used to connect two different types of plumbing components. This particular adapter has a 1/2" BSPP...

The John Guest PM418E is a 18mm outside diameter (O/D) equal straight connector. It is part of the John Guest range of push-fit fittings, which ar...

The John Guest PM051214E is a type of fitting used for connecting pipes or tubes together. Specifically, it is a 1/2" BSPP (British Standard Pipe ...

The John Guest PM0218E is an 18mm O/D Equal Tee Connector designed for use in water and beverage dispensing applications. The connector is made fr...

The John Guest PM0318E is an 18mm outside diameter (O/D) equal elbow connector. It is a type of push-fit fitting that is designed to connect two p...

The John Guest PM1918E is a black collet cover designed for use with 18mm outside diameter (O/D) tubing. The collet cover is used in conjunction w...

15mm Outside Diameter x 12mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Nylon 12, Tube, Working Temperature -35C to +80C, Maximu...

The John Guest PM011514E is a male straight adapter fitting designed to connect 15mm outside diameter (O/D) tubing to a 1/2" British Standard Pipe...

The John Guest PM15WB is a brass wingback fitting with a 15mm outside diameter and a 1/2" BSPP female thread. It is designed for use in plumbing a...

The John Guest PM221515E is a stem elbow adaptor used in plumbing applications. It has an outside diameter (O/D) of 15mm on both ends, and is desi...

The John Guest PM815E is a 15mm O/D (outside diameter) plug in black color. It is designed to be used with John Guest's range of push-fit fittings...

15mm Outside Diameter, Fast-track Ring Main System, Tube, Flexi-Joint, Working Temperature -20C to +70C, Maximum Working Pressure 10 bar. The John ...

3/4" BSP Parallel Female x 1/2" BSP Parallel Female, Fast-track Ring Main System, Aluminium, Wall Box, 1 Inlet, 3 Outlets, Working Temperature -20C...

18mm Outside Diameter x 14mm Inside Diameter, Fast-track Ring Main System, 3 Metre Length, Nylon 12, Tube, Working Temperature -35C to +80C, Maximu...

The John Guest PM03018AE is a reducing tee fitting that allows you to connect three pipes of different sizes. In this case, it has a 18mm outer di...

The John Guest PM221818E is a Stem Elbow Adapter designed for use in plumbing and fluid handling systems. It has an outside diameter (O/D) of 18mm...

The John Guest PM011814E is a male straight adapter fitting designed to connect two different types of pipes with different diameters and threads....

The John Guest PM61815E is a stem reducer fitting that is designed to reduce the outside diameter (O/D) of a tube or pipe from 18mm to 15mm. This ...

The John Guest PM62815E is a stem reducer fitting designed to connect two pipes with different outside diameters. It has a 28mm outside diameter (...

22mm Outside Diameter x 28mm Stem Outside Diameter, Fast-track Ring Main System, Stem Reducer, Working Temperature -20C to +70C, Maximum Working Pr...

The John Guest PM828E is a black plastic plug with an outside diameter (O/D) of 28mm. It is designed for use with John Guest fittings, which are qu...

The John Guest PM428E is a 28mm outside diameter (O/D) equal straight connector. Like the PM422E, it is a plastic fitting that is designed for use...

28mm Outside Diameter, Fast-track Ring Main System, Equal, Tee, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar, John Guest The Jo...

28mm Outside Diameter, Fast-track Ring Main System, Tube Clip, Working Temperature -20C to +70C, Maximum Working Pressure 7 bar The John Guest 405-...

The John Guest PM0328E is a 28mm O/D (outside diameter) Equal Elbow Connector. It is a push-fit fitting that can be used in a variety of applicati...

The John Guest ALU-CUTTER28 is a pipe cutter designed specifically for use with 28mm outer diameter aluminum pipes. The cutter is designed to make ...

1/2" BSP Parallel Female x 15mm Outside Diameter, Fast-track Ring Main System, Stem Adaptor, Working Temperature -20C to +70C, Maximum Working Pres...

3/4" BSP Parallel Female x 22mm Outside Diameter, Fast-track Ring Main System, Stem Adaptor, Working Temperature -20C to +70C, Maximum Working Pres...